| 68955A Franke Slewing Ring Bearings | C:26 mm; Basic dynamic load rating (C):26,4 kN; Db:35,6 mm; Basic static load rating (C0):56 kN; E:40 mm; Reference speed:12000 r/min; Weight:0,091 Kg; Bore Diameter (mm):35; r2 min.:0,3 mm; r1 min.:0,3 mm; Bearing number:RNAO35x45x26; Fw:35 mm; ra max.:0,3 mm; Size (mm):35x45x26; Outer Diameter (mm):45; da:39,4 mm; Fatigue load limit (Pu):6,55; D:45 mm; Da:40,5 mm; Width (mm):26; |
| 38 1091 01 Rollix Slewing Ring Bearings | Fw:50 mm; (Oil) Lubrication Speed:8400 r/min; (Refer.)Mass(kg):0.057; Housing(max.):55.029; C0r:92.4; P/S:S; (Grease) Lubrication Speed:5400 r/min; Bc:30 mm; Bore Diameter (mm):50; Housing(min.):55.010; Cu:14.4; Shaft(min.):49.989; Cr:38.2; Weight:0.057 Kg; Basic static load rating (C0):92.4 kN; Bearing No.:K50X55X30FV1; Grease lub.:5400; Oil lub.:8400; Basic dynamic load rating (C):38.2 kN; Outer Diameter (mm):56; |
| 73057L Franke Slewing Ring Bearings | Bore Diameter (mm):10; Fw:10 mm; (Grease) Lubrication Speed:19 000 r/min; Size (mm):10x16x12; Db:10,3 mm; Da max.:18 mm; Bearing number:RNAO-10×20×12; E:16 mm; Weight:0,018 Kg; C:12 mm; r min.:0,3 mm; Outer Diameter (mm):16; D:20 mm; db:15,7 mm; Basic static load rating (C0):5,95 kN; ra max.:0,3 mm; Basic dynamic load rating (C):7,1 kN; Width (mm):12; |
| 7 1997 04 Rollix Slewing Ring Bearings | B:136 mm; c:3,5 mm; Basic dynamic load rating (C):1070 kN; Bearing number:NAS 5036UUNR; D2:294 mm; J:217 mm; Basic static load rating (C0):2140 kN; S:12,5 mm; Width (mm):136; Weight:30 Kg; D:280 mm; C1:110 mm; d:180 mm; Size (mm):180x280x136; Outer Diameter (mm):280; Bore Diameter (mm):180; f:5 mm; C:135 mm; r min.:1,5 mm; |
| 66401L Franke Slewing Ring Bearings | da min:34,6 mm; Cr:19900 N / Dynamic lo; Bore Diameter (mm):30; ra1 max:0,6 mm; d:30 mm; D1:46,9 mm; Width (mm):13; rmin:1 mm; ra max:1 mm; α:40 ° / Angle; D:55 mm; a:24 mm; Da max:50,4 mm; Size (mm):30x55x13; B:13 mm; r1 min:0,6 mm; nB:10700 1/min / Refere; d1:40,7 mm; Db max:51,8 mm; Bearing number:7006-B-TVP; |
| 2 1805 02 Rollix Slewing Ring Bearings | Db - Cup Backface Backing Diameter:67.06 mm; Series:02800; Cg - Geometry Factor:0.074; Cone Part Number:02872; K - Factor7:1.29; C90 - Dynamic Radial Rating (90 million revolutions)4:3830 lbf; G2 - Heat Generation Factor (Rib-Roller End):10.1; Cup Part Number:02831; Design Units:Imperial; r - Cup Backface To Clear Radius2:0.76 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2980 lbf; db - Cone Backface Backing Diameter:37.59 mm; |
| 66184L Franke Slewing Ring Bearings | N:16 mm; Bolt (G):M14; J:157 mm; A:40 mm; Bore Diameter (mm):45; H:189 mm; A2:23 mm; L:116 mm; Bearing number:UCFLX09; A0:55.6 mm; A1:14 mm; S:19 mm; B:51.6 mm; d1:45 mm; |
| 73035L Franke Slewing Ring Bearings | Calculation factor (e):0.36; ra max.:2.5 mm; Basic dynamic load rating (C):187 kN; (Grease) Lubrication Speed:2300 r/min; B:77 mm; Bore Diameter (mm):105; Bearing number:2321; Width (mm):77; Outer Diameter (mm):225; r min.:3 mm; Basic static load rating (C0):78.0 kN; d:105 mm; Size (mm):105x225x77; Calculation factor (Y0):1.83; da min.:118 mm; Calculation factor (Y1):1.75; Da max.:212 mm; Weight:14.3 Kg; |